Revision History:
12/10/20 - First Release (QR)
12/17/20 - Added BB reinstallation and changed some wording (QR)
2/2/21 - Added details about “Safety” and “I2C” connections (QR)
5/21/21 - Added images about “Safety” and “I2C” connections (MR)
9/21/21 - Added PicoFlex disconnecting video (MR)
...
Disconnect all of the white Picoflex (multi-wire) connectors by gently pulling up and wiggling them off of the board they are attached to. Do not pull on the wires of the connectors and be careful not to break the bottom half of the connector off of the board itself. The Picoflex connectors are circled in red in the next picture and the video below shows the proper removal process. Please note that not all Picoflex connectors are circled in the photo but all need to be disconnected.
...
Info |
---|
|
...
Step 3: Remove the Main Board
...