Page Comparison

...

1. Download and install PuTTY.

2. Launch PuTTY.

3. Input the IP address (192.168.7.2) into the Host Name field, leave everything else set to its default.

4. Click the Open button.

5. If prompted for a username and/or password, input use pocketnc for both.

...

NOTE: On Windows 10 and 11 computers, the Terminal app can also be used to SSH to the machine and that process would more closely follow the Mac steps below.

Mac PC

1. Open the pre-installed MacOS application called Terminal

2. Enter ssh pocketnc@192.168.6.2. If asked about trusting your device, type yes and then press enter.

3. When prompted for a password, input pocketncand press enter. Note: the password will not show up as it is typed.

...