...
We’re working on integrating Kinetic Control with our simulator to display a plot of the currently running program in a 3D virtual environment. We demoed this at IMTS2022.
Demo of control without any hardware hooked up: Live Demo
...
NYC CNC’s coverage at IMTS 2022 - Impeller Demo
...
We encountered issues with the Mastercam post processor and figured out the issue using the simulator. The programs below were causing nicks in the parts and we were able to track down the issues to a specific line using the simulator.
| Iframe |
|---|
| src | https://sim.pentamachine.com/?titleBar=hide&theta=300&phi=60&cameraDistance=3¤tLine=377&plotOffset=.006&gcodePane=hide&model=imts-demo-mastercam.glb&program=carabiner-nicks.ngc&machine=SOLO&tool=%7B%22P%22:1,%22R%22:0.0787,%22Z%22:-5.6329,%22holder%22:%22HOLDER1%22%7D&tool=%7B%22P%22:2,%22R%22:0.0625,%22Z%22:-4.6289,%22holder%22:%22HOLDER1%22,%22type%22:%22BALL%22%7D&tool=%7B%22P%22:3,%22R%22:0.059,%22Z%22:-5.7570,%22holder%22:%22HOLDER1%22%7D&tool=%7B%22P%22:4,%22R%22:0.059,%22Z%22:-5,%22holder%22:%22HOLDER1%22,%22type%22:%22ENGRAVE%22%7D&tool=%7B%22P%22:7,%22R%22:0.3937,%22Z%22:-5.2433,%22holder%22:%22NONE%22%7D&tool=%7B%22P%22:6,%22R%22:0.0625,%22Z%22:-5.875,%22holder%22:%22HOLDER1%22,%22type%22:%22ENGRAVE%22%7D&tool=%7B%22P%22:4,%22R%22:0.0625,%22Z%22:-5.27,%22holder%22:%22HOLDER1%22%7D&tool=%7B%22P%22:5,%22R%22:0.0625,%22Z%22:-5.6273,%22holder%22:%22HOLDER1%22%7D |
|---|
| width | 100% |
|---|
| frameborder | hide |
|---|
| id | Carabiner Nicks |
|---|
| height | 500px |
|---|
|
...