...
We encountered issues with the Mastercam post processor and figured out the issue using the simulator. The programs below were causing nicks in the parts and we were able to track down the issues to a specific line using the simulator.
| Iframe |
|---|
| src | https://sim.pentamachine.com/?titleBar=hide&theta=300&phi=60&cameraDistance=3¤tLine=377&plotOffset=.006&gcodePane=hide&model=imts-demo-mastercam.glb&program=carabiner-nicks.ngc&machine=SOLO&tool=%7B%22P%22:1,%22R%22:0.0787,%22Z%22:-5.6329,%22holder%22:%22HOLDER1%22%7D&tool=%7B%22P%22:2,%22R%22:0.0625,%22Z%22:-4.6289,%22holder%22:%22HOLDER1%22,%22type%22:%22BALL%22%7D&tool=%7B%22P%22:3,%22R%22:0.059,%22Z%22:-5.7570,%22holder%22:%22HOLDER1%22%7D&tool=%7B%22P%22:4,%22R%22:0.059,%22Z%22:-5,%22holder%22:%22HOLDER1%22,%22type%22:%22ENGRAVE%22%7D&tool=%7B%22P%22:7,%22R%22:0.3937,%22Z%22:-5.2433,%22holder%22:%22NONE%22%7D&tool=%7B%22P%22:6,%22R%22:0.0625,%22Z%22:-5.875,%22holder%22:%22HOLDER1%22,%22type%22:%22ENGRAVE%22%7D&tool=%7B%22P%22:4,%22R%22:0.0625,%22Z%22:-5.27,%22holder%22:%22HOLDER1%22%7D&tool=%7B%22P%22:5,%22R%22:0.0625,%22Z%22:-5.6273,%22holder%22:%22HOLDER1%22%7D |
|---|
| width | 100% |
|---|
| frameborder | hide |
|---|
| id | Carabiner Nicks |
|---|
| height | 500px |
|---|
|
...