Kinetic Control leverages the G code interpreter provided by LinuxCNC. Here are a number of links with helpful information:

• http://linuxcnc.org/docs/2.8/html/gcode/overview.html

• http://linuxcnc.org/docs/2.8/html/gcode/g-code.html

• http://linuxcnc.org/docs/2.8/html/gcode/m-code.html

• http://linuxcnc.org/docs/2.8/html/gcode/o-code.html

• http://linuxcnc.org/docs/2.8/html/gcode/other-code.html

• http://linuxcnc.org/docs/2.8/html/gcode/rs274ngc.html

There are additional codes for using TCPC, RWO and Rotary Unwind:

• TCPC

• Rotated Work Offsets

• Rotary Unwind

• Kinetic Control UI notifications