Pocket NC V2 Demo Part-Spiral (Kinetic Control)

Click below to download the tutorial on running the "Spiral" demonstration part on the Pocket NC. The G-code for the part is also available below.

You will not need the Fusion 360 Spiral Part v6.f3z to run the G-code but it is provided for reference. When you use a CAM file you did not produce always check the results are what you expect before running the machine.

This tutorial uses the Kinetic Control user interface released on 11/1/2021; if you are using the old user interface, please refer to the original version of this tutorial posted under “Legacy Resources”

Revision History:

First Release: June 2019 (QR)

Revised for Kinetic Control: Nov. 2021 (MR)

Pocket NC User Resources

Pocket NC V2 Demo Part-Spiral (Kinetic Control)

Related content